Відео

I have read that Epoxy and Polyester is the most used resin for forged carbon fiber, But according to science, polyester doesnt bond well with chopped carbon, any views on this?

I have heard that epoxy and polyester is the most used resin for forged carbon fiber, but I have read that, polyester doesn't bond that well with carbon, any views on this?

Hey Matthieu, I was looking to start making plates myself and I have most of what I need, but do you have any recommendations for the glass surface to lay everything on? I got a tempered glass cutting board from Amazon but not sure if it will work okay or not. Would it need to be a certain thickness or anything special? Thank you in advance. Great videos!!

So you didn’t answer the question you asked so don’t watch any more of your videos thanks

It's been almost a year since your last video. I sincerely hope all is well with you, Matthieu.

space grade my ass

Matthieu, kan je zeggen welke clearcoat je precies gebruikt? Ik heb enkele forged carbon stukken gemaakt, een spraygun gekocht met 0.8mm nozzle. Maar welke clearcoat moet ik precies gebruiken? Ik wil niet het verkeerde kopen :p. Thanks!

amazing job, so cool!

Why not just brush the resin onto the fiber before vacuum sealing.

NIce. I use Easycomposites stuff. How did you polish up the inside of the mould?

The final result looks great. Do the hinges self-close so the door stays shut, or did you have to fasten a clasping mechanism? Thanks!

I'm quite late to the party but regarding on how to clean the wax sheet residue from the polyester part. Simply wash with wax degreaser/final wash cleaner used in Automotive paint industry (commonly known as Pre-Kleano)

Can I use this material to make an underwater sub?

Very good video

Hey, great video! Do you recommend doing this for the entire tool surface of a mold? I had an incident where the entire surface degraded. I was wondering if I can sand, roughen and reapply the gel coat and polish it to a gloss finish without fearing the gel coat ripping off during a product pull.

14:13 Funny story, it actually kind of looks like a Luxury Ball, a fairly niche/rare Pokeball type. They both have a black top and bottom, the main difference being that the Luxury Ball has a golden center ring as opposed to your red one. It also has a golden ring on its upper half, whereas yours is symmetrical - still, a really close match!

pero eso es fibra de vidrio no?

SOrry first time I see the enclave bit... where can I learn ,more about this....?

Great Video! Do the tubes have good circular runout? What is the best technique to achieve the highest circular runout without reworking it?

whenever I try to sand epoxy directly, im alwayssss left with scratch marks no matter how many grits I use or how much I sand with each grit. Is this what the topcoat is for, is it easier to sand? Or am I just not good at what im doing

We are professional in the rolling process. 🎉🎉

Hi Matt! At 5:50 you're pouring something into the back of the PLA mould: what is this material? Thanks!

Why not use uv resin and a uv light? It’s thicker and dries almost instantly

Türkiye language pls

Really cool idea to make them from 3d printing, but why not just cnc machine them out of aluminum? Seems way quicker and simpler to me?

11. Years on, how did the frame hold out, I recently cracked my frame so going to be undertaking a repair, it would be interesting to know if it lasted and you had enjoyment from riding your repair. Great video, thank you

Hi, off topic but since you work with carbon fiber please advise! I have an exhaust end cap made with 2x2 twill carbon fiber. It is attached by small removable bolts and the fitment on the metal exhaust. I want to remove the end cap without damaging it. There are no adhesives only the tight fitment, how would you knock off the end cap? Please suggest a way to loosen or lubricate/penetrate between the carbon fiber cap and titanium exhaust. TIA!

Your every video is worth gold. Still, no way to create a perfect piece without practice and fails😅

Hi Mat, could you please review this old video about a Kafo resin infusion and tell me how you would save some weight, since KAFO orthetics are more about stability than weight saving? I'd really like to know your opinion, especially about the carbon knitted tubes.

I have horrible stringing issues with my S1. I cant figure it out. Messed with retraction, speed of print, temperature, coasting. Would love any advice to fix stringing. Awesome prints.

Who the split mold process be the same if I were to joint two ends together at a corner? Like for a front car splitter lip or a rear car diffuser. Those parts have complex shapes that can’t be don’t in 1 pieces of carbon fiber so multiple pieces of carbon fiber are used.

Does the spray max 2k clear have uv protection? I don’t see it on the can or on the discretion.

I like your ideas, use to work for profile composite/ profile manufacturing building shafts for the paddle industry and prototypes in the lacrosse field etc. Looking to make a special layup blow gun. I see wil need to get larger oven for what to make

NICE JOB

You really should move all the electronics that are at the bottom outside of the actual enclosure. Perhaps think about making a box underneath to house it.

What year honda front cover was that for?

Hi Thanks for the video. I have a doubt. When u build such a tall shelf with this 8020 did u feel any sort of instability? I was thinking to make one shelf for my fish room with size of 75”x20”x90” (l x w x h) do u think it can hold them.?

Hello Matthieu, I am making a mould, but unfortunately can't buy EasyC. Primer from my country. Can I use any other polyester primer that won't be destroyed after gelcoat and polyester resin application?

Are both air pressure sanders dual action?

Kan je dit ook doen met een lichte kleur, zoals beige?

Thanks, a great video.

Imagine doing this purely for a cosmetic docking station - this man owns funkopops, you just know it. I feel great shame on his families behalf.

It's clear what you show in this video, thanks for that. I have a question about this ender 3 S1? I have this ender 3 S1 and I don't know if I can see anywhere on the screen during printing which layer is being printed at that moment. Is that visible somewhere?

your low-angle helix (almost hoop-like coils) would be good for holding pressure, but won't make a very strong beam --or torsion tube, either).

Carbon fiber will emit toxic fumes if it is coated with epoxy... you should never use a laser on carbon fiber.

How do you frame the panels into the extrusions? Any seal strips as well?

Stockton Crush: “What you’re hearing rn is my innovative brilliance”

Love the project. I stumbled upon your video because i want a bigger wind protection faring on my 2022 ktm690 because she will be accompaning me on a 12 month trip. I really would like to do two round headlights like the old school Tenere 600's. It all has to be assembled on a rebelx rally tower. Would you be able to do such a job?

The beauty of the carbon fibre comes out better with a gloss finish IMHO.

‏important. Please tell me how many hours should we wait for it to dry between layers?